| 电缆槽模具怎样避免漏浆现象 |
| 添加时间：2017/5/24 17:56:13 浏览次数： |
| 电缆槽模具的内部使用钢筋钢纤维,具有很好的包装,不会出现脱落现象。电缆槽模具通常是在整个项目将使用相同的模具生产,确保组件大小整齐统一,建设更准确的交付。电缆槽模具通常由底盘、模具、模具和夹具。外模双方活动的模板和模板的两端。双方活动的低端模板由松散和底盘。两个模板,一个内表面倒u形一致,另一个内表面倒u形凹边缘。所以电缆槽模具具有很好的组模具和模具,使用和维护非常方便,稳定的电缆槽模具在一起,不会出现泥浆的现象。电缆槽模具现在在高速铁路和高速公路在生产电缆槽模具占据了重要的地位,。电缆槽模具尺寸在满足使用功能的相对较小的高和宽的同时,减少挖洞的大小在建设的过程中,缩短工期和资本投入。 The inner steel fiber of the cable groove mould is very good packing and it will not fall off. The cable trough is usually made in the same mould throughout the project, ensuring that the component size is uniform and the construction is more accurate. Cable trough dies are usually made of chassis, molds, molds and fixtures. Both sides of the template and the template of the external module. The low-end templates for both activities are loose and chassis. Two templates, one with an inverted u in one, and the other inside the u-shaped concave edge. So cable tray mould has the very good set of mould and die, use and maintenance is very convenient and stable cable slot die together, won't appear the phenomenon of mud. Cable channel moulds now occupy an important place in the high-speed railway and expressway in the production of cable trough. Cable tray mould in meet the use function of relatively small size of high and wide at the same time, reduce the size of the holes in the process of construction, shorten the construction period and capital investment. |
| 上一页 模具已经成为我们生活中的安全品 |
| 下一页 桥面电缆槽RPC盖板铺设 |
Copyright © 技术支持：遨游网络