保定电缆槽模具厂

1）：槽体构件尺寸在满足使用功能的同时高和宽相对减小，减少工程的土石方挖掘量、节省工时、加快工程进度；

1): the size of the trough component can reduce the height and width of the project while meeting the use function, reduce the amount of earthwork excavation, save working hours and speed up the progress of the project;

（2）：槽与槽之间连接缝隙很小，连接的过程中不需要抹灰，有泄水作用；

(2) the gap between the slot and the slot is very small, and the plastering process is not needed;

（3）：构件采用高频振动、高压压制而成，具有密实度高、韧性好的特点；电缆槽可打泻水孔；侧壁可打孔有利于接线盒的固定安装；

(3) the component is made of high frequency vibration and high pressure. It has the characteristics of high compactness and good toughness. The cable groove can be used to drain the water hole. The side wall can be punched, which is beneficial to the fixed installation of the junction box;

（4）：电缆槽边角的R型设计，内部采用钢纤维为加强筋，分散性好、对混凝土的裹附力加强，这些都可有效避免构件掉边掉角；

(4) the R type design of the angle of the cable groove, the steel fiber is used as the reinforcing rib, the dispersion is good, and the wrapping force of the concrete is strengthened. All of these can effectively avoid the falling off and falling off of the component;

（5）：电缆槽在整个工程中采用同一模具制作，保证了构件尺寸的规整统一性，使精品工程得到保障；

(5) the cable trough is made by the same mould in the whole project, which ensures the regularity and unity of the size of the component and ensures the quality project;