| 电缆槽盖板模具技术要求 |
| 添加时间：2019/1/24 16:47:10 浏览次数： |
| （1）：槽体构件尺寸在满足使用功能的同时高和宽相对减小，减少工程的土石方挖掘量、节省工时、加快工程进度； (1) The dimensions of groove components are relatively reduced in height and width while satisfying the use function, which reduces the amount of earthwork excavation, saves man-hours and speeds up the progress of the project. （2）：槽与槽之间连接缝隙很小，连接的过程中不需要抹灰，有泄水作用； (2) The gap between the groove and the groove is very small, and there is no need for plastering in the process of connection, which has the function of draining water. （3）：构件采用高频振动、高压压制而成，具有密实度高、韧性；电缆槽可打泻水孔；侧壁可打孔有利于接线盒的固定安装； (3) Componentsdibanhw.37ix.com.cnbianyaqisx.37ix.com.cnmojuhp.37ix.com.cn mojujcj.37ix.com.cn mojugsn.37ix.com.cnmojuly.37ix.com.cn are made of high-frequency vibration and high-pressure compression, which have high compactness and toughness; cable grooves can be perforated with water holes; side walls can be perforated to facilitate the fixed installation of junction boxes; （4）：电缆槽边角的R型设计，内部采用钢纤维为加强筋，对混凝土的裹附力加强，这些都可有效避免构件掉边掉角； (4) R-type design of cable groove edge angle, steel fiber reinforced reinforcement inside, strengthening the binding force of concrete, all of these can effectively avoid component edge drop angle; （5）：电缆槽在整个工程中采用同一模具制作，保证了构件尺寸的规整统一性，使精品工程得到保障； (5) The cable groove is made by the same die in the whole project, which ensures the uniformity of component size and ensures the quality engineering. |
| 上一页 电力电缆的选择应遵照以下原则 |
| 下一页 盖板模具是如何提升服务 |
Copyright © 技术支持：遨游网络