| 电缆槽盖板模具技术要求 |
| 添加时间：2018/5/10 15:17:00 浏览次数： |
| 电缆槽盖板模具技术要求 Technical requirements for the die of cable groove cover （1）：槽体构件尺寸在满足使用功能的同时高和宽相对减小，减少工程的土石方挖掘量、节省工时、加快工程进度； (1): the size of the tank component can reduce the height and width at the same time, reduce the excavation of the earth and stone, save time and speed up the progress of the project. （2）：槽与槽之间连接缝隙很小，连接的过程中不需要抹灰，有泄水作用； (2): the gap between the groove and the slot is very small, and there is no need for plastering in the process of connection. （3）：构件采用高频振动、高压压制而成，具有密实度高、韧性；电缆槽可打泻水孔；侧壁可打孔有利于接线盒的固定安装； (3): the component is made of high frequency vibration and high pressure, which has high density and toughness, and the cable slot can make water hole, and the side wall can be perforated to the fixed installation of the junction box. （4）：电缆槽边角的R型设计，内部采用钢纤维为加强筋，对混凝土的裹附力加强，这些都可有效避免构件掉边掉角； (4): the R type design of the corner of the cable groove, the steel fiber is used as the reinforcing bar, and the binding force of the concrete is strengthened. All these can effectively avoid the edge drop angle of the component. （5）：电缆槽在整个工程中采用同一模具制作，保证了构件尺寸的规整统一性，使精品工程得到保障； (5): the cable trough is used in the whole project to make the same mould, ensuring the integrity and uniformity of the size of the components and ensuring the quality works. |
| 上一页 电缆槽模具安全规程 |
| 下一页 电缆槽模具材质 |
Copyright © 技术支持：遨游网络